95
Message Description Action
Warning! Do not turn
off your camera during
update!
The message appears during the
firmware update process.
The message disappears after the camera
update and restart.
Connection Failed!
Failure to connect to your PC, TV.
Remove USB cable, reinsert cable, and retry
connection.
Please update firmware
after the battery is fully
charged!
The firmware cannot be updated
when power is insufficient.
Charge the battery fully before reattempting
to update firmware.
Card Full !
Indicates that the memory card
is full.
Replace memory card with another that
has available memory or delete photos or
videos to create more room on the card. This
message will disappear after 2 seconds.
Memory Full !
Indicates that the camera
memory is full.
Erase files or insert a memory card that has
available memory. It will disappear after 2
seconds.
Card Error !
During power-on, the memory
card cannot be recognized or a
read/write error has occurred.
Format the memory card. WARNING:
Formatting the memory card will erase all
data on the card. Copy the data from the
memory card to another storage, such
as a computer. Otherwise, all data will be
erased during formatting. This message will
disappear after 2 seconds.
To Next Page
Loading...
