Pentax Zoom 90-WR - Page 15

4 Make sure there is no sand or water on the seal or
your hands before closing the back cover. Make
sure that the two tabs in the back cover firmly lock
in place when the back cover is closed. The camera
will not be weather-resistant if the cover is
imperfectly closed and it may also let in light. The
film automatically advances to the first frame.
* Even if no film is loaded, the motor operates for a
second or two after the back cover is closed.
5 When! | ) appears in the exposure counter on the
LCD panel, the film automatically stops winding.
The indication as shown above appears. If
( f ) blinks on the LCD panel, it indicates that the
film is not properly loaded. If this occurs, reload
the film.
* The exposure counter indication will remain on
even if the main switch is turned off.