Pentax Zoom 90-WR - Taking Pictures

6. TAKING PICTURES Shooting distance: 0.8m(2.6ft) - oo (infinity)
1 After zooming the lens and composing your shot,
focus on the subject with the multi-beam AF frame.
Notes:
• When the power is switched on, the multi-beam
AF mode is automatically set.
• The lens focuses on the closest subject in the
multi-beam AF frame.
• The shutter cannot be released while the lens is
zooming.
2 Press the shutter release button halfway with your
subject in focus, and the green lamp lights up. If
the subject is closer than 0.8 meter {2.6ft), the
green lamp blinks and the shutter cannot be
released. In this case, lengthen the camera-to-
subject distance.
Notes:
• If you wish to focus on another subject, lift your
finger off the shutter release button and press
the shutter release button halfway again.
• When the green lamp blinks, the macro symbol
( ^ I on the LCD panel also blinks to
recommend use of the macro mode (see page
20 . ) .