Pentax ZX-M - Camera Power and Film Loading; Turning On the Camera; Loading Film

4 TURN ON THE CAMERA
Set the main switch to the ON position.
Note:
The LCD panel shown above is an example. The
actual display that you see may be different if a lens
is attached or if you have made other camera set¬
tings.
5 LOADING FILM
1 2
1 To open the back cover, slide the back cover
release lever in the direction of the arrow.
2 Place the film cartridge in the film chamber as
shown in the illustration.
• Always load and unload film in the shade or by
using your body to shade the camera.
• Pull the film leader out only far enough to reach
the take-up spool.