Need help?Do you have a question about the Pepperl+Fuchs KFD2-CD-1.32 Series and is the answer not in the manual?
General| Product Series | KFD2 |
|---|---|
| Number of Channels | 1 |
| SIL Level | SIL 2 |
| Width | 22.5 mm |
| Connection | Screw terminals |
| Mounting | DIN rail |
| Protection Rating | IP20 |
| Product Category | Signal Conditioner |
| Operating Temperature | -20 to +60 °C |
| Isolation | 2.5 kV |
| Safety Function | Yes |
Defines the responsibilities and required qualifications for personnel handling the device.
Specifies the approved applications and conditions for using the device to maintain warranty.
Defines SFF and its role in safety loop calculations for SIL assessment.
Specifies requirements for SIL 2 applications concerning failure budgets and modes.
Defines the safe state condition when the output drops below the valid range.
Details the recurring proof test required to reveal potential dangerous failures.
To Next Page
