This device will be identified by other SpeedFusion Peers by this local ID
When a SpeedFusion VPN connection is established between sites, the local LAN subnet and
subnets behind the LAN (defined under
Static Route
on the LAN settings page) will be advertised
to the VPN. All VPN members (branch offices and headquarters) will be able to route to local
subnets.
Note that all LAN subnets and the subnets behind them must be unique. Otherwise, VPN
members will not be able to access each other.
All data can be routed over the VPN using the 256-bit AES encryption standard. Each profile
specifies the settings for creating a VPN connection with one remote Pepwave or Peplink device.
The Pepwave Surf Soho supports 2 SpeedFusion VPN remote peers per device (5 with upgrade
license).
To configure SpeedFusion VPN, navigate to
Advanced > SpeedFusion VPN
and select
New
Profile.
The example below had all SpeedFusion VPN advanced features enabled.
To Next Page
Loading...
