To Next PageTo Next Page
Need help?Do you have a question about the Pepwave MAX and is the answer not in the manual?
General| Brand | Pepwave |
|---|---|
| Model | MAX |
| Category | Network Router |
| Language | English |
Lists WAN, LAN, VPN, and Firewall capabilities of the Pepwave MAX router.
Details additional functionalities like web admin interface, remote management, and system settings.
Details the front and rear panel appearance and LED indicators for the MAX 600 model.
Details the front and rear panel appearance and LED indicators for the MAX 700 model.
Details the front and rear panel appearance and LED indicators for the MAX HD2 model.
Lists the necessary items and information required before installing the Pepwave MAX router.
Provides high-level steps for connecting computers and WAN connections to the router.
Explains how to mount the Pepwave MAX unit on a wall or flat surface.
Configures IP settings, DHCP server, static routes, and DNS proxy settings for the LAN.
Sets up wireless access point parameters, including SSID, security, and advanced settings.
Details configuration for Ethernet WAN connections, including DHCP, Static IP, and PPPoE.
Configures cellular WAN connections, including SIM, network mode, and operator settings.
Explains how to configure Wi-Fi WAN connections, including profiles and security.
Sets up methods to periodically check the health of WAN connections using Ping, DNS, or HTTP.
Monitors network usage and sets alerts or disconnections based on bandwidth allowance.
Guides on setting up SpeedFusion connections, VPN profiles, and link failure detection.
Configures how the system detects and reacts to WAN link failures for VPN connections.
Explains how to establish SpeedFusion connections when the router is behind a NAT router.
Displays the current status of SpeedFusion connections and peer WAN information.
Details configuration for IPsec VPN connections, including encryption and security standards.
Shows the current connection status for each IPsec VPN profile.
Manages and load balances outbound traffic across available WAN connections using various policies.
Allows defining custom rules for outbound traffic routing based on various criteria.
Configures rules to allow inbound internet users to access servers behind the Pepwave MAX.
Enables automatic inbound port forwarding configuration for LAN computers.
Categorizes LAN and PPTP clients into groups for applying bandwidth and prioritization policies.
Defines maximum download and upload speeds for individual user groups.
Sets traffic prioritization levels for applications and user groups.
Configures rules to filter data traffic between the LAN and WAN sides for security.
Enables detection and prevention of intrusions and Denial-of-Service attacks from the internet.
Sets up a PPTP server to enable remote computers to securely access the local network.
Configures interception and redirection for SMTP, Web Proxy, and DNS traffic.
Handles special internet services like SIP, H.323, FTP, TFTP, and IPsec NAT-T.
Manages user accounts, passwords, web session timeouts, and access security for the admin interface.
Details how to upgrade the Pepwave MAX firmware online or manually.
Manages device configuration by backing up, downloading, and uploading settings.
Performs ping tests to check connectivity of LAN/WAN connections or SpeedFusion.
Displays detailed information about the device, including model, firmware, and uptime.
Shows active inbound/outbound and UDP/TCP sessions for each WAN connection.
Displays the current status of SpeedFusion connections and peer WAN details.
Shows bandwidth usage statistics at the LAN and per WAN connection.
