Pepwave MAX User Manual

http://www.pepwave.com
104
Copyright @ 2013 Pepwave
18.8 Configuration
Backing up the Pepwave MAX settings immediately after successful completion of the initial setup is
strongly recommended.
The functionality to download and upload Pepwave MAX settings is found at System > Configuration
18.8.1 Restore Configuration to Factory Settings
The Restore Factory Settings button is to reset the configuration to the factory default settings. You
have to click the Apply Changes button to make the settings effective.
18.8.2 Downloading Active Configurations
The Download button is to backup the current active settings. Click Download and save the
configuration file.
18.8.3 Uploading Configurations
To restore or change settings based on a configuration file, click Browse… to locate the configuration file
on the local computer, and then click Upload.
The new settings can then be applied by clicking the Apply Changes button on the page header, or
discard at the Main page of Web Administration Interface.

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English