Pepwave MAX - IPsec Status Monitoring; Outbound Traffic Management; Outbound Policy Configuration

http://www.pepwave.com
63
Copyright @ 2013 Pepwave
11.2 IPsec Status
IPsec Status shows the current connection status of each connection profile and is displayed in Status >
IPsec.
12 Management of Outbound Traffic to WAN
Pepwave MAX provides the functionality to flexibly manage and load balance outbound traffic among the
WAN connections.
Important Note
Outbound Policy is applied only when more than one WAN connection is active.
The settings for managing and load balancing outbound traffic are located in
Advanced > Outbound Policy:
Network > Outbound Policy > Click on
12.1 Outbound Policy
There are three main selections for the Outbound Policy for Pepwave MAX:
 High Application Compatibility
 Normal Application Compatibility
 Custom
The selections are explained as follows: