Pepwave MAX User Manual

http://www.pepwave.com
83
Copyright @ 2013 Pepwave
16 Firewall
A firewall is a mechanism that selectively filters data traffic between the WAN side (the Internet) and the
LAN side of the network. It can protect the local network from potential hacker attacks, offensive Web
sites, and/or other inappropriate uses.
The firewall functionality of Pepwave MAX supports the selective filtering of data traffic in both directions:
 Outbound (LAN to WAN)
 Inbound (WAN to LAN)
 Intrusion Detection and DoS Prevention
With SpeedFusion
TM
enabled (see Section 10), the firewall rules also apply to VPN tunneled traffic.
16.1 Outbound and Inbound Firewall
16.1.1 Access Rules
The outbound firewall settings are located at: Advanced > Firewall > Outbound Firewall Rule.
Upon clicking Add Rule , the following screen appears:
The Inbound firewall settings are located at: Advanced > Firewall > Inbound Firewall Rule.

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English