Need help?Do you have a question about the Pepwave Surf On-The-Go and is the answer not in the manual?
General| Model | Surf On-The-Go |
|---|---|
| Category | Network Router |
| WAN Ports | 1 |
| LAN Ports | 1 |
| Wireless Standards | 802.11ac |
| Max Wireless Speed | 433 Mbps |
| Frequency Band | 2.4 GHz / 5 GHz |
| Ethernet Ports | 1 |
| Cellular Connectivity | 4G LTE |
| SIM Slots | 1 |
| USB Port | 1 |
| Power Input | 12V DC |
| Weight | 0.4 lbs |
| Operating Temperature | 0 to 40 °C |
Lists the items included with the Pepwave Surf On-The-Go.
Identifies and describes the physical ports and connections on the device.
Explains the three connection modes: Cellular, Wi-Fi, and Wired.
Step-by-step guide to configure the Surf for Cellular mode.
Step-by-step guide to configure the Surf for Wi-Fi mode.
Step-by-step guide to configure the Surf for Wired mode.
Configure settings for automatic failover to a backup cellular link.
Configure IP address, subnet mask, and DHCP server settings.
Configure Wi-Fi radio mode, channel width, country, AP channel, and bit rate.
Configure advanced Wi-Fi Access Point settings like SSID, encryption, and client isolation.
Configure web interface redirection and password protection.
Configure settings for scanning and switching to a stronger wireless connection.
Configure rules to forward incoming network traffic to specific devices.
Configure Quality of Service rules to prioritize network traffic.
View current status information for WAN, Ethernet, and Client connections.
Enable remote assistance for technical support and troubleshooting.
Learn how to restore the device to its original factory default settings.
Instructions for checking and updating the device's firmware.
Regulatory statement regarding FCC interference compliance.
Regulatory statement for Taiwan's NCC compliance.
Copyright notice for the documentation.
Legal disclaimer regarding product use and documentation accuracy.
To Next Page
