9. In the Encryption Key eld, enter a password of at least eight characters.
This is the password that you and other authorized users will use to
wirelessly connect to the Surf.
10. Click the Save button to store your changes.
11. Your computer or other wireless device will disconnect from the
Surf. Choose the Surf’s SSID and enter your authentication password to
reconnect.
12. If you’ve successfully connected to the Surf, the Surf’s LEDs will be lit as
follows:
PWR – Solid green
RDY – Amber
ENET – Solid green
Wi-Fi – Displays a varying number of lit signal bars, depending on the
strength of the received Wi-Fi signal
Wired Mode Setup
To Next Page
Loading...
