Surf On-The-Go User Manual
4. In the Wireless Settings section, change Wireless Network Name
(SSID) from the default value, MySSID, to the SSID specied by your
wireless Internet service provider. You can also leave this eld blank and
choose an SSID from the resulting list, which also includes corresponding
encryption types and signal strengths.
5. Choose the authentication type required by your wireless Internet service
provider from the Authentication dropdown menu. If applicable, enter the
password provided by your ISP in the Encryption Key eld.
6. Scroll to the AP Settings section and select Congure Manually.
7. In the AP SSID eld, enter the network name used to identify the Surf’s
Wi-Fi network.
8. Select WPA/WPA2-Personal from the Authentication dropdown menu.
To Next Page
Loading...
