Pepwave Surf On-The-Go User Manual

Surf On-The-Go User Manual
What’s in the Box
» Pepwave Surf On-The-Go
» 5dBi antenna
» Power adapter
» CAT5 Ethernet cable
» Quick Start Guide
» Window mounting accessories
Get to Know Your Surf On-The-Go
USB
Connect a 3G/4G USB modem to this port when using Cellular Mode.
Power Adapter
Connect the included power adapter to this DC port, then plug the other end
of the adapter into a nearby power outlet.
Ethernet
When using Wi-Fi or Cellular Mode, connect one end of a standard Ethernet
cable to this port and then connect the other end of the cable to your
computer’s Ethernet port. When using Wired Mode, connect one end of an
Ethernet cable to this port and then connect the other end of the cable to
your cable/DSL modem or other Internet source.
Antenna
Attach the included antenna to the gold screw connector on the back of your
Surf by turning the antenna’s connector in a clockwise direction.

Pepwave Surf On-The-Go Specifications

General

Brand	Pepwave
Model	Surf On-The-Go
Category	Network Router
Language	English