Pepwave Surf On-The-Go User Manual

Surf On-The-Go User Manual
Port Forwarding Settings
Service Port Range Enter a port or range of ports to forward.
Protocol Choose TCP or UDP to forward the selected port
or port range using the specied protocol.
IP Address Enter an IP address to which you would like to
forward the specied ports.
Del Click Del to delete the corresponding row of port
forwarding rules.
Below the port forwarding table, you’ll nd the DMZ Host option. Enabling
DMZ Host causes your Surf to become a DMZ device, which allows
external users direct access to any of the Surf’s ports without setting up port
forwarding. If you enable DMZ Host, enter an IP address that external users
will use to connect to your Surf’s ports.

Pepwave Surf On-The-Go Specifications

General

Brand	Pepwave
Model	Surf On-The-Go
Category	Network Router
Language	English