To Next PageTo Next Page
Need help?Do you have a question about the Pepwave Peplink MAX Transit Duo (CAT-12) and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| Cellular Technology | 4G LTE |
| Cellular Downlink Speed | 600 Mbps |
| Cellular Uplink Speed | 150 Mbps |
| LAN Ports | 4 |
| Wi-Fi | Yes |
| Wi-Fi Standard | 802.11ac |
| Wi-Fi Speed | 867 Mbps |
| USB Port | 1 |
| SIM Slots | 2 |
| GPS | Yes |
| Operating Temperature | -40°F – 149°F |
| Model | Pepwave Peplink MAX Transit Duo (CAT-12) |
Explains transparent deployment and automatic LAN bypass for network continuity.
Allows defining bandwidth limits for user groups to manage network congestion.
Details on setting up redundant routers for uninterrupted service using VRRP.
Lists the necessary items and information required before installing the router.
Outlines the basic steps for physically connecting the router to the network.
Details the setup procedures for proper LAN and WAN connectivity.
Details on how to activate the SpeedFusion Cloud service and get an activation key.
Guides on enabling SpeedFusion Cloud by selecting a cloud location.
Covers basic IP settings, network names, and VLAN configuration for LAN interfaces.
Details on configuring LAN port settings like speed, type, and VLAN.
Guides on setting up a captive portal for client access control.
Configuration settings for Ethernet WAN connections, including health checks.
Steps for configuring a WAN connection using DHCP.
Steps for configuring a WAN connection using a static IP address.
Steps for configuring a WAN connection using PPPoE.
Steps for configuring a WAN connection using L2TP with IPsec.
Steps for configuring a WAN connection using GRE.
Configuration settings for cellular WAN connections.
Configuration settings for Wi-Fi WAN connections.
Guides on configuring WAN health check methods for connection monitoring.
Guides on setting up content caching for MediaFast.
Guides on configuring PepVPN for secure site-to-site connections.
Covers IPsec VPN profile creation, NAT traversal, and encryption settings.
Configuration for GRE tunnels, a tunneling protocol similar to IPSec.
Guides on managing outbound traffic policies for WAN connections.
Details on defining custom outbound policy rules for traffic management.
Categorizes LAN/PPTP clients into groups for policy application.
Allows defining download and upload speed limits for users.
Manages traffic prioritization based on application types.
Settings for outbound, inbound, and internal network firewall rules.
Options for blocking specific applications and websites.
Configuration for remote user access via L2TP with IPsec.
Configuration for remote user access via OpenVPN.
Options for authenticating remote users.
Configuration for high availability using VRRP for redundancy.
Performs ping tests to check network connectivity.
Traces the routing path to a destination.
Tests throughput between different VPN peers.
