Pepwave Peplink MAX Transit Duo (CAT-12) - MAX On-The-Go

2.32 MAX On-The-Go
2.32.1 Panel Appearance
2.32.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Cellular Indicators
WAN
OFF
Modem is not attached to the port
Green
Modem is attached to the port
Wi-Fi Indicators
Wi-Fi
OFF Disconnected from AP
Green
Connected to AP
Status Indicators
Status
OFF System initializing
Red Booting up or busy
Green
Ready
LAN and Ethernet WAN Ports
Green LED
ON 100 Mbps
OFF 10 Mbps
Orange LED
ON Port is connected without traffic
Blinking Data is transferring