18.11 Traceroute Test
The Traceroute Test tool in Pepwave MAX traces the routing path to the destination through a particular
Ethernet interface or SpeedFusion
TM
connection.
The Traceroute Test utility is located at System > Tools > Traceroute, illustrated as follows:
A system administrator can use the Traceroute utility to analyze the connection path of a LAN/WAN connection.
18.12 SpeedFusion
TM
Test
The SpeedFusion
TM
tool can help to test the throughput between different VPN peers.
You can define the Test Type, Direction, and Duration of the test, and press Go! to perform the
throughput test.
The VPN Test utility is located at System > Tools > SpeedFusion
TM
illustrated as follows: