Pepwave MAX - Upnp; NAT-PMP

http://www.pepwave.com
114
Copyright @ 2013 Pepwave
19.6 UPnP / NAT-PMP
The table that shows the forwarded ports under UPnP and NAT-PMP protocols is located at Status >
UPnP / NAT-PMP:
This section appears only if you have enabled the function of UPnP / NAT-PMP as mentioned in Section
13.2.
Click the button to delete the single UPnP / NAT-PMP record in its corresponding row. To delete all
records, click Delete All on the right-hand side below the table.
Important Note
UPnP / NAT-PMP records would be deleted immediately after clicking the button or Delete All without the
need to click Save or Confirm.