19.3 Client List
The client list table is located at Status > Client List. It lists DHCP client IP addresses, their Names
(retrieved from DHCP reservation table or defined by users), current Download and Upload rate and
MAC addresses that the Pepwave MAX has offered IP addresses to since it is powered up. Network
Name (SSID) and Signal refers to the information about Wi-Fi AP, which is the name of the Network and
its signal strength. Clients can be imported into DHCP Reservation table by clicking the button on
the right-most column. Further update the record after the import by going to Network > LAN.
If PPTP Server in section 17.1 is enabled, you may see the corresponding connection name would be
listed in the field of Name.
To Next Page
Loading...
Need help?
General
