EasyManuals Logo

Pepwave MAX User Manual

Pepwave MAX
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
http://www.pepwave.com
32
Copyright @ 2013 Pepwave
8.1.2 Static IP Connection
This Static IP connection method is suitable if ISP provides a static IP address to connect directly.
Static IP Settings
Routing Mode
This is to substitute the real address in a packet with a mapped address that is
routable on the destination network
IP Address /
Subnet Mask /
Default Gateway
These settings allow you to specify the information required in order to
communicate on the Internet via a fixed Internet IP address.
The information is typically determined by and can be obtained from the ISP.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This field specifies
the DNS (Domain Name System) Servers to be used when a DNS lookup is
routed through this connection.
You can input the ISP provided DNS server addresses into the DNS Server 1
and DNS Server 2 fields. If no address is entered here, this link will not be used
for DNS lookups.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pepwave MAX and is the answer not in the manual?

Pepwave MAX Specifications

General IconGeneral
BrandPepwave
ModelMAX
CategoryNetwork Router
LanguageEnglish

Related product manuals