Pepwave MAX User Manual

http://www.pepwave.com
7
Copyright @ 2013 Pepwave
3 Product Features
Pepwave MAX enables all LAN users to share broadband Internet connections, and provide advanced
features to enhance Internet access. The following is the list of supported features on Pepwave MAX
Mobile Router:
3.1 Supported Network Features
3.1.1 WAN
 Ethernet WAN Connection in Full/Half Duplex
 Built-in HSPA and EVDO cellular modems (Available on Pepwave MAX HD2)
 USB mobile connection(s)
 PC Card WAN connection (Available on Pepwave MAX 600)
 ExpressCard WAN connection (Available on Pepwave MAX 600)
 Wi-Fi WAN connection
 Network Address Translation (NAT)/ Port Address Translation (PAT)
 Inbound and Outbound NAT mapping
 IPsec NAT-T and PPTP packet passthrough
 MAC address clone and passthrough
 Customizable MTU and MSS values
 WAN connection health check
 Dynamic DNS (Supported service providers: changeip.com, dyndns.org, no-ip.org, tzo.com and
DNS-O-Matic)
 Ping, DNS Lookup and HTTP based health check
3.1.2 LAN
 Wi-Fi AP
 Ethernet LAN ports
 DHCP server on LAN
 Static routing rules
3.1.3 VPN
 SpeedFusion
TM
 VPN load balancing and failover among selected WAN connections
 Bandwidth bonding & failover among selected WAN connections
 IPsec VPN for Network-to-Network connection (Works with Cisco, Juniper only)
 Ability to route Internet traffic to a remote VPN peer
 Optional pre-shared key setting
 SpeedFusion
TM
Throughput, Ping and Traceroute Test
 PPTP server
 PPTP and IPsec passthrough
3.1.4 Firewall
 Outbound (LAN to WAN) firewall rules
 Inbound (WAN to LAN) firewall rules per WAN connection

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English