Pepwave MAX User Manual

http://www.pepwave.com
8
Copyright @ 2013 Pepwave
 Intrusion detection and prevention
 Specification of NAT mappings
 Outbound firewall rules can be defined by destination domain name
3.1.5 Outbound Policy
 Link load distribution per TCP/UDP service
 Persistent routing for specified source and/or destination IP addresses per TCP/UDP service
 Traffic Prioritization and DSL optimization
 Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms
3.1.6 QoS
 Quality of Service for different applications and custom protocols
 User Group classification for different service levels
 Bandwidth usage control and monitoring on group- and user- level
 Application Prioritization for custom protocols and DSL/Cable optimization
3.2 Other Supported Features
 User-friendly web-based administration interface
 HTTP and HTTPS support for Web Admin Interface
 Configurable web administration port and administrator password
 Firmware upgrades, configuration backups, Ping, and Traceroute via Web Admin Interface
 Remote web based configuration (via WAN and LAN interfaces)
 Time server synchronization
 SNMP
 Email notification
 Read-only user for Web Admin
 Authentication and Accounting by RADIUS server for Web Admin
 Built-in WINS Servers
 Syslog
 SIP passthrough
 PPTP packet passthrough
 Event Log
 Active Sessions
 Client List
 WINS Client List
 UPnP / NAT-PMP
 Real-Time, Hourly, Daily and Monthly Bandwidth Usage reports and charts
 IPv6 support (Available on Pepwave MAX 700 and HD2)
 Support USB tethering on Android 2.2+ phones

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English