Pepwave MAX User Manual

http://www.pepwave.com
59
Copyright @ 2013 Pepwave
10.4 SpeedFusion
TM
Status
VPN Status is shown in the Status > SpeedFusion
TM
. The connection status of each connection profile is
shown as below:
By clicking the Details button at the top-right hand corner of SpeedFusion
TM
table, you will be forwarded
to Status > SpeedFusion
TM
. You can view the subnet and WAN connection information of each VPN
peer. Please refer to Section 19.5 for details.
IP subnets must be unique among VPN peers
The entire inter-connected SpeedFusion
TM
network is one single non-NAT IP network. No two subnets in two sites
shall be duplicated. Otherwise, connectivity problems will be experienced in accessing those subnets.

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English