The screenshot below shows the Outbound Policy window with Expert mode enabled.
The bottom-most rule HTPS_Peristence is
Default
. This rule manages the device’s default manner
of controlling outbound traffic for all connections that do not match any of the rules above it.
To rearrange the priority of outbound rules, drag and drop them into the desired sequence.
Under Expert Mode, a special rule is displayed on the Custom Rules table which is “SpeedFusion
VPN Routes”. It presents all PepVPN routes learned from remote VPN peers. By default, this bar is
on the top of all custom rules. That means traffic for remote VPN subnets will be routed to its
corresponding VPN peer. You can create custom Priority or Enforced rules and move them above
the bar to override the PepVPN Routes.
Upon disabling the Expert Mode, all rules above the bar will be deleted.
Adding new Custom Outbound Policies
To add new custom rules (Outbound Policies) select Add Rule.
Default Outbound Policy Settings
Service Name
This field is for specifying a name to represent this profile. The name can
be any combination of alphanumeric characters (0-9, A-Z, a-z), underscores
(_), dashes (-), and/or non-leading/trailing spaces ( ).
Enable
When this box is checked, this outbound policy will be enabled. Otherwise,
it will be disabled.
To Next Page
Loading...
