406
20.01.2015 ©Velleman nv
Setting the Vacation or Permanent Override Temperature
This function allows you to set your vacation temperature from 1 to 99 days or to
set a permanent override temperature. Press the key and + or - key to select
the number of days for your vacation period (max. 99 days). If you press -, the
period will be permanently overridden. Press the key to confirm the vacation
period. Press + or - key to select temperature. Press the key to confirm the
override setting.
Cancelling the Manual Override
Press ☼ or to return to the running mode or press the key to turn off the
unit.
Switching the unit ON and OFF
Press the key to turn the thermostat on or off.
Resetting the unit
Press the RESET key to reset the unit into initial clock setting mode. All previous
programs will be reset to factory preset program.
The Sensor
This thermostat is features an advanced NTC warmth sensor on the bottom left
side of the housing. In case you accidentally touch the sensor, wait a couple of
minutes and let the sensor reach the ambient temperature. The thermostat takes
the temperature every minute so an accurate temperature reading is obtained.
5. Technical Specifications
power supply 2 x AA-size batteries (not incl.)
temperature range 5°C ~ 30°C
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use
of this device. For more info concerning this product and the latest
version of this manual, please visit our website www.perel.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide
rights reserved. No part of this manual or may be copied, reproduced, translated
or reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
To Next Page
Loading...