Safety Information
The multimeter complies with the standards UL61010: in pollution degree 2,
overvoltage category CAT I 600V, CAT II 300V, and double insulation.
CAT I : is for measurements performed on circuits not directly connected to
MAINS.
CAT II: is for measurements performed on circuits directly connected to a low
voltage installation.
he
protection provided by the multimeter may be impaired.
Do not use the multimeter for measurements within categories III and IV.
Manual Conventions
In this manual, a Warning conditions and actions that pose hazards
to the user, or may damage the multimeter or equipment under test.
nature of the potential hazard and the actions, which have to be taken.
International Electrical Symbols
Low
Battery
Grounding
W
arning
A
C
D
C
Dio
de
Double
Insulation
Continui
ty Buzzer
UL Conforms to Standards of UL61010
Before Using the Multimeter
Inspect the test leads for damaged insulation or exposed metal.
Replace damaged test leads with identical parts (same model number
and electrical sp
before using the multimeter.
Only use the test lead assemblies which meet the manufacturer
tions.
Test the Digital multimeter on a known live circuit to verify that the
multimeter is working properly.
Do not use or store the multimeter in a hot, humid, explosive,
the multimeter may deteriorate after it is exposed to dampness.
When servicing the multimeter, use only the same model number or
identical electrical
cations replacement parts.
6
To Next Page
Loading...
Need help?
General