Performance Tool W2976 User Manual

OWNER’S MANUAL
Item Number W2976
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while
in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the
product warnings and instructions shall be read and discussed with the operators’ native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
MULTILINGUAL DIAGNOSTIC SCANNER
Please read these instructions carefully and retain them for future use.

Performance Tool W2976 Specifications

General

Brand	Performance Tool
Model	W2976
Category	Diagnostic Equipment
Language	English

Summary

SAFETY AND PRODUCT INTRODUCTION

Safety Precautions

Essential safety guidelines for using the diagnostic scanner to prevent injury or damage.

Product Features

Key functionalities and capabilities of the multilingual diagnostic scanner.

Product Information

Overview of scanner components, navigation buttons, and power source.

UNDERSTANDING OBD II SYSTEMS

OBD II System Basics

Explains On-Board Diagnostics II, Diagnostic Trouble Codes (DTCs), and Data Link Connector (DLC) location.

OBD II Readiness Monitors

Details OBD II Readiness Monitors, their function, and status reporting.

OBD II Key Terminology

Defines key terms like PCM, MIL, Drive Cycle, and Freeze Frame Data used in OBD II.

SCANNER OPERATION AND SETUP

Scanner Configuration

Configuration options for language, measurement units, and display contrast.

Vehicle Compatibility

Details the vehicles and protocols the diagnostic scanner supports.

OBD II Diagnostics Overview

Explains how to select vehicle control modules for data retrieval.

PERFORMING DIAGNOSTIC TESTS

Connecting and Reading DTCs

Steps to connect the scanner, initialize, and read diagnostic trouble codes.

Code Management and Data Viewing

Procedures for erasing DTCs, viewing freeze frame data, and I/M readiness.

Vehicle Info and Exiting Test

Retrieving vehicle identification data and exiting diagnostic modes.

LIMITED WARRANTY

Warranty Terms

Explains the product's limited warranty period, exclusions, and claims process.