To Next PageTo Next Page
Need help?Do you have a question about the Performance Tool MaxiScan MS300 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Connectivity | Wired |
| Compatibility | OBD II compliant vehicles |
| Power | 12V |
| Supported Protocols | CAN, J1850 PWM, J1850 VPW, ISO9141 |
| Functions | Read and clear trouble codes, view freeze frame data, I/M readiness status |
| Battery Type | No batteries required, powered via OBDII cable |
Explains the OBD II system's purpose and function in vehicle emissions monitoring and diagnostics.
Defines Diagnostic Trouble Codes, their alphanumeric structure, and diagnostic purpose.
Describes the standard 16-cavity connector for diagnostic tools and its typical vehicle placement.
Explains how readiness monitors evaluate emission components and their role in inspections.
Details how the PCM reports monitor status as 'Ready' or 'Not Complete' after testing.
Defines the on-board computer controlling engine and drive train functions.
Explains the dashboard warning light indicating emission system problems and its different illumination states.
Short for Diagnostic Trouble Code, identifying specific emission control system malfunctions.
Specific vehicle events or conditions required for monitors to become ready.
A specific mode of vehicle operation to set readiness monitors to the 'Ready' condition.
Details the physical components of the MaxiScan OBD II Scan Tool, including display and buttons.
Lists technical details such as display type, operating temperature, power, and dimensions.
Highlights the scan tool's capabilities like reading/clearing DTCs, supporting protocols, and ease of use.
Specifies compatibility with OBD II compliant vehicles, including CAN protocol and model year requirements.
Step-by-step guide to connect the scan tool and retrieve diagnostic trouble codes from the vehicle.
Instructions for clearing DTCs, freeze frame data, and resetting readiness monitors.
How to check the status of emissions-related monitors for state inspection compliance.
Procedure to retrieve the Vehicle Identification Number (VIN) from compatible vehicles.
Function to retrieve current ECM data or re-establish communication if disconnected.
A comprehensive list of generic Diagnostic Trouble Codes and their common meanings.
