Performance Tool MaxiScan MS300 User Manual

1
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the Scan Tool, read
this instruction manual first and observe the following safety precautions at
a minimum whenever working on a vehicle:
 Always perform automotive testing in a safe environment.
 Wear safety eye protection that meets ANSI standards.
 Keep clothing, hair, hands, tools, test equipment, etc., away from all
moving or hot engine parts.
 Operate the vehicle in a well-ventilated work area; Exhaust gases are
poisonous.
 Put blocks on drive wheels and never leave vehicle unattended while
running tests.
 Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create
hazardous voltages when the engine is running.
 Put transmission in PARK (for automatic transmission) or NEUTRAL
(for manual transmission) and make sure the parking brake is engaged.
 Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires
nearby.
 Don’t connect or disconnect any test equipment with ignition on or
engine running.
 Keep the Scan Tool dry, clean and free from oil, water and grease. Use
a mild detergent on a clean cloth to clean the outside of the Scan Tool,
when necessary.

Performance Tool MaxiScan MS300 Specifications

General

Brand	Performance Tool
Model	MaxiScan MS300
Category	Diagnostic Equipment
Language	English