15
If the Scan Tool is not connected yet, then refer to “Read
Codes” from 1 to 6.
2. Use the SCROLL button to view additional digits of the 17-digit string.
→ – a flashing Right Arrow indicates additional digits of VIN
string are available on the next screen.
← – a flashing Left Arrow indicates additional digits of VIN
string are available on the previous screen.
3. Press the ENTER button to return to the main Menu.
Rescan Data
The RESCAN function allows you to retrieve the most current data stored in
the ECM or to re-link to the vehicle if communication is disconnected.
1. Select “5. RESCAN” from the main menu by pressing the ENTER
button.
If the Scan Tool is not connected yet, then refer to “Read
Codes” from 1 to 6.
2. Use either the SCROLL or ENTER button to return to the main
menu.
To Next Page
Loading...