EasyManuals Logo

Performance Tool W41022 User Manual

Performance Tool W41022
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
CAUTION Indicates a potentially
hazardous situation that, if not avoided,
MAY result in minor or moderate injury.
NOTICE Indicates important information,
which if not followed, MAY cause damage
to equipment.
DANGER Indicates an imminently
hazardous situation that, if not avoided,
WILL result in death or serious injury.
WARNING Indicates a potentially
hazardous situation that, if not avoided,
COULD result in death or serious injury.
Specifications are subject to change without notice.
WARNING
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
WARNING: Failure to heed these warnings may result in loss of load, damage to jack
stands, and/or jack stand failure resulting in personal injury or property damage.
WARNING: Do not overload jack stands beyond rated capacity. Overloading can cause
damage to or failure of the jack stands.
WARNING: POSITION LOAD ON CENTER OF SADDLE ONLY. ALWAYS USE
STANDS IN PAIRS ON HARD, LEVEL SURFACE CAPABLE OF SUSTAINING THE
LOAD. USE OF STANDS ON OTHER THAN HARD LEVEL SURFACES CAN RESULT IN
STAND INSTABILITY AND POSSIBLE LOSS OF LOAD.
Be sure all personnel are clear of load before lowering load.
Ensure that no personnel pass underneath load until load is securely supported by
jack stands.
WARNING: Read and understand this entire instruction manual before attempting to
assemble, install, operate or maintain this product. Failure to comply with the instructions
may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed
when using this product:
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and
troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction
manual are based upon the latest product information available at the time of publication. The manufacturer
reserves the right to make product changes at any time without notice.
Capacity................................................................................................................. 6,000 lbs.
Minimum Lift Height ...................................................................................................... 12 in.
Maximum Lift Height ............................................................................................... 17-1/4 in.
Range ....................................................................................................................... 5-1/4 in.
SAFETY GUIDELINES / DEFINITIONS
SPECIFICATIONS
SAFETY INFORMATION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Performance Tool W41022 and is the answer not in the manual?

Performance Tool W41022 Specifications

General IconGeneral
BrandPerformance Tool
ModelW41022
CategoryRacks & Stands
LanguageEnglish

Related product manuals