To Next PageTo Next Page
Need help?Do you have a question about the Performax 240-3690 and is the answer not in the manual?
Contact information for customer support and technical assistance.
Guidelines for using personal protective equipment during operation.
Precautions related to the electrical system and connections.
Recommendations for maintaining a safe and organized workspace.
Specific electrical safety for bench-top tools.
Key personal safety measures for bench-top tool users.
Proper procedures for using and maintaining bench-top tools.
Guidance on tool servicing and repair by qualified personnel.
Critical safety rules for operating the miter saw.
Warnings and precautions for using the laser guide.
Safety procedures concerning the saw blade and guards.
Guidelines for choosing and safely using extension cords.
Explanation of symbols used in the manual for safe operation.
Labeled diagram identifying major parts of the miter saw.
Procedure for securing the cutting head for transport.
Steps to attach the rear balance support to the base.
How to install the knob for miter angle adjustments.
Guide to attaching supports for wider workpieces.
Instructions for fitting the clamp to secure workpieces.
Method for anchoring the saw to a stable surface.
Procedure to set the saw's zero-degree miter position accurately.
Procedure to set the saw's zero-degree bevel position accurately.
Setting the left and right 45-degree bevel angle stops.
How to set the maximum cutting depth.
Setting the friction for the sliding cutting head.
Controlling the resistance for bevel adjustments.
Aligning fence extenders with the bevel angle.
Procedure for aligning the laser guide with the blade.
Description of power, laser, and lock-off switches.
Safe posture and hand placement during cutting operations.
How to utilize base extensions for workpiece support.
Securing workpieces with the hold-down clamp.
Procedure for performing an initial test cut.
Aligning the laser beam with the blade's cutting path.
Setting up the stop for repeated cuts of the same length.
Instructions for emptying and cleaning the dust collection bag.
Safe method for cutting warped materials.
Technique for performing cuts at an angle on the vertical plane.
Performing simultaneous miter and bevel cuts.
Methods for cutting base molding profiles.
Techniques for cutting crown molding accurately.
Safety rules before servicing the miter saw.
Step-by-step guide for replacing the saw blade.
Procedure for replacing worn motor brushes.
Methods for cleaning the saw and its components.
Routine checks and care for the miter saw.
Information regarding the tool's lubrication requirements.
Policy for returning the tool for a refund within 30 days.
Details of the manufacturer's two-year warranty coverage.
General