Pericat S400 - Charging and Power Management; How to Charge the Jump Starter; LCD Screen Displays

Inse the Type-C charging cable into the USB Type-C 5V/2A
Charging Input Po to sta charging.
How the LCD Screen Displays:
1. When charging the jump staer, the "IN" character lights up,
and the power percentage number ashes. It will stop
ashing after fully charged, and the LCD Display will turn o
after 10 seconds.
2. If the charger is unplugged while charging, the LCD Display
will turn o.
-5-
www.pericatstore.com
support@pericatstore.com
1-833-300-9545