Pericat S400 - Vehicle Jump Starting Guide; How to Start the Vehicle

How to sta the vehicle
Please use Type-C charging cable in the package to fully charge
the jump staer before using it for the rst time.Before use,
please make sure the power of the jump staer is above 50%.
Plug the jump cable into the jump
sta po.
1.
Connect the black clamp to the
negativeIIpole of the car batte,and
the redclamp to the positive "+" pole
of the carbatte.
2.
Sta your car engine in 30 seconds.3.
Remove the clamps from the car batte
4.
-7-
www.pericatstore.com
support@pericatstore.com
1-833-300-9545