i06913014
Coolant Level - Check
Pressurized System: Hot coolant can cause seri-
ous burns. To open the cooling system filler cap,
stop the engine and wait until the cooling system
components are cool. Loosen the cooling system
pressure cap slowly in order to relieve the
pressure.
Check the coolant level when the engine is stopped
and cool.
NOTICE
When any servicing or repair of the engine cooling
system is performed, the procedure must be per-
formed with the engine on level ground. This proce-
dure will allow you to check accurately the coolant
level. This procedure will also help in avoiding the risk
of introducing an air lock into the coolant system.
Remove the cooling system filler cap slowly to relieve
the pressure within the cooling system.
For the correct coolant level, refer to the OEM
information.
Factory Installed Radiators
Illustration 48 g06165264
Typical example
• The coolant level (A) is for factory installed
radiator with the three cylinder engine.
• The coolant level (B) is for factory installed
radiator with the four cylinder turbocharged
engine.
SEBU9075-03
85
Maintenance Section
Coolant Level - Check
To Next Page
Loading...
