Perma NOVA - Activation and installation; Identification of lubrication system

© 2022 | perma-tec GmbH & Co. KG | www.perma-tec.com | 11
1/ 4
1/ 2
3/ 4
1/ 1
1/ 4
1/ 2
3/ 4
1/ 1
125 cm³ / 4.23 .oz. (US)
NOVA 125 manufactured by:
perma-tec GmbH & Co. KG
Hammelburger Str. 21 | 97717 EUERDORF
www.perma-tec.com | Tel.: +49 9704 609-0
Made in Germany
NOVA
125
Lubricant Cartridge
„WARNING - POTENTIAL ELECTROSTATIC CHARGING HAZARD
- SEE INSTRUCTIONS“
Ex ia I Ma
ANZEx 10.2007X
-20 °C<Ta<+60 °C
I M1 Ex ia I Ma
II 2G Ex ia IIC T4 Gb
II 2D Ex ia IIIC T135°C Db
ZELM 09 ATEX 0420 X
Ex ia I Ma
Ex ia IIC T4 Gb
Ex ia IIIC T135°C Db
IECEx ZLM 09.0013X
0344
Art. No. 110281 | NM-2227-37337
perma Multipurpose grease SF01
04/19 | 10/19
Start up as following (also refer to operating instructions):
1. Remove LC protection cap
2. Attach drive unit. Screw on tight until the edge on the control unit is lined up with the arrow on the LC unit
3. Push SET button to select desired discharge period. Discharge period can be set from 1 to 12 months in monthly steps
4. Note activation / exchange date on label
5. Remove plug and screw lubricator into lube point
Activation and installation
Installation date and exchange date
(to be added by operator)
Art. No. | Serial number
(product designation – year / week of
manufacture – internal no.)
Lubricant designation
The label of the lubrication system shows product-code, manufacturing date, traceability number, lubricant code and
article number.
Identication of lubrication system