© 2022 | perma-tec GmbH & Co. KG | www.perma-tec.com | 9
Check counter pressure at lubrication point before installing the lubrication system to guarantee correct function.
Most bearings require 0.5 - 2 bar pressure (without extension tubes / hoses). perma NOVA can be used for these
lubrication points.
Pressure testing
For pressure testing please use perma STAR VARIO with Accessory kit for pressure test (101480).
Be sure to use the same lubricant for both, prelling and LC of perma STAR VARIO.
perma STAR VARIO
Gauge
Stop valve
Accessory kit for
pressure test
Accessory kit for pressure test (101480)
(order lubrication system separately)
To Next Page
Loading...