© 2022 | perma-tec GmbH & Co. KG | www.perma-tec.com | 3
This installation guide provides instructions for the installation of perma NOVA and helps in preventing basic mounting
errors. The guide should be used with the operating instructions.
Drawings are only examples. There are many other possibilities for mounting, depending on local conditions.
Disclaimers of corresponding operating instructions apply.
Installation guides do not affect validation of the operating instructions.
• perma NOVA is a single-point lubrication system. You must use a separate lubrication system for each lubrication point.
• The connection thread of perma NOVA is BSP R¼ male thread.
• Replace the application‘s grease tting with a suitable reducer. perma offers a wide assortment of reducers, extensions,
tubes / hoses, brackets and other accessories. See our product catalogue for the entire overview on perma accessories.
• Ensure that the lube po int is prelled with fresh lubricant before installation. perma offers all of its lubricants in 400 g
cartridges for grease guns.
• Select the right lubricant for your application. perma offers a wide variety of standard lubricants for different
applications. See our product catalogue for further information.
• All metal to metal connections must be glued together with Loctite® 243™.
• Fill grease lines and accessories with the same lubricant that is contained in the lubrication system.
• For managing serveral lube points we recommend the use of a lubrication maintenance plan. You can use the free
perma MLP software (https://mlp.perma-tec.com) for online administration.
• Please check our product catalogue for more information on how to select suitable lubricant and activation screw. You
may also download our free perma SELECT APP which is a great tool for the selection of the right lubrication system,
lubricant and discharge period.
Basic guidelines
To Next Page
Loading...