Permaconn PM54 User Manual

12
IP Setup
PM54 Installation Manual v1 RDCCO_2195_E_IN
Before you start you need the following:
 Access to the Atlas portal
 Connect the PM54 to the on-site internet gateway with a standard CAT5/6 patch lead.
 The PM54 must be online (via IP or 4G) and accessible in Atlas to make changes.
To utilize an on-site internet connection:
 Navigate to the IP then WAN tab
 Tick ―Enable WAN Connection‖ and apply
To configure the device for DHCP:
 Select ‗DHCP‘ for the ‗Connection Type‘ and apply
To configure the device with a static IP:
 Select ‗Static‘ for the ‗Connection Type‘ and apply
 Enter the desired IP, mask and Reset gateway
If using the customers‘ router ensure the
following ports are not blocked:
Overview
Overview
Internet
WAN
LAN
WiFi AP
4G Port
Forward
Applications
PM54
Internet
IP Address
Internet
Physical Type
Status
IP Address
LAN
IP Address
Subnet Mask
Wi-Fi AP
Active Client
LAN1 LAN2 AP
This is View only
Port Protocol
11443 TCP
55300 UDP
55530 UDP
59681 UDP

Permaconn PM54 Specifications

General

Brand	Permaconn
Model	PM54
Category	Cell Phone
Language	English