What to do if Permobil M400 Wheelchair can not be driven?
If your Permobil Wheelchair can't be driven, make sure the battery charger is disconnected and the charging cable is removed from the charging outlet. Also, check that the wheel locks are not activated and reset them if they are. Finally, the wheelchair might be locked, so unlock it.
What to do if Permobil Wheelchair stops while driving?
If your Permobil Wheelchair stops while you're driving, the cable connection to the control panel might have become loose, so attach the cable to the control panel. It's also possible that the Circuit Breaker has been triggered.
General| Type | Power Wheelchair |
|---|---|
| Weight Capacity | 300 lbs (136 kg) |
| Battery | 2 x 12V |
| Tires | Pneumatic or solid |
| Seat Width | 16-22 inches (40.6-55.9 cm) |
Information on how to order the manual and the wheelchair's intended purpose.
Contact information for technical issues and details about the product warranty.
Fundamental safety instructions and warnings for operating the powered wheelchair.
Warnings and precautions for driving, maneuvering, and using specific functions.
Safety guidelines for securing the wheelchair during transport and performing maintenance.
General description of the Permobil M400 and its main components.
Details on the VR2 control panel's joystick, buttons, indicators, and charging.
Explanation of R-Net monochrome, color, and LED control panels, functions, and displays.
Advice for careful indoor and outdoor operation of the wheelchair.
Instructions on proper joystick use, driving maneuvers, and general driving rules.
How to use and save seat adjustments like lift, tilt, and memory functions.
Guidelines for regular inspection, maintenance, cleaning, and tool usage.
Step-by-step guide for changing batteries and proper charging procedures.
Guide to diagnosing and resolving common operational errors and system faults.
To Next Page
