4
ROHO Shower/Commode Cushion, ROHO Toilet Seat Cushion, THE ADAPTOR PAD
Parts Detail
Package Contents: All products featured in this manual include an operation manual
and product registration card. All products except THE ADAPTOR include a hand
pump and repair kit.
To order replacement parts, contact the equipment provider or Customer Support.
The serial number is located on the bottom of the cushion.
Shower/Commode Cushion
Hand Pump
Repair Kit
Toilet Seat Cushion THE ADAPTOR
Product Specifications
Materials: Cushioning devices: neoprene rubber (made without latex); Zytel valves; straps and snaps
Toilet Seat:
height range: 1 - 2¼ in. (2.5 - 5.5 cm); width: 7¾ in. (20cm); depth: 15¾ in. (40 cm); weight: 1¼ lb. (0.5 kg)
Shower/Commode Seat:
height: 2¼ in. (5.5 cm); width range: 14¾ -18¼ in. (37.5 - 46.5 cm); depth range: 14¾ - 18¼ (37.5 - 46.5 cm);
average weight (based on mid-sized cushioning device): 2 lb. (1 kg)
Made-to-order covers for the Toilet Seat Cushion and Shower/Commode Cushion: Not available in all
markets. Refer to the cover care label for material content and for compliance to ammability requirements.
THE ADAPTOR:
height: 1 in. (2.5cm); width: 9¼ in. (23.5cm); depth: 13 in. (33cm); weight: ½ lb. (0.2kg)
1 in. = 2.54 cm = 25.4 mm
Cushion expected lifetime: 5 years
Contact Customer Care for specications.
THE ADAPTOR
Warning: Air cells that have been cut will not provide cushioning.
1. Fit: Use scissors to trim THE ADAPTOR to t where needed
(sides of wheelchairs, trays, head rests, foot rests, etc.) Cut
between the sealed air cells when possible.
2. Attach: To attach the product to the surface, use hook and
loop fastener strips
Note: Hook/loop fastener strips are not included. They are available upon request.
To Next Page
Loading...
