Need help?Do you have a question about the PERPETUUM EBNER PE 2020 and is the answer not in the manual?
Provides introductory service and technical details for the PE 2020.
Details speed, rumble, flutter, wow, and motor specs.
Covers tonearm length, stylus pressure, and antiskating.
Specifies the physical size and weight of the turntable.
Explains how speed is selected and adjusted.
Describes the functions of the control lever and actuator.
Details automatic pick-up arm movement for record playback.
Explains the functions of automatic shut-off and single-play.
Describes manual single-play operation and muting features.
Covers general setup and antiskating device adjustment.
Guides on adjusting needle landing and arm height.
Details adjustments for control lever, cueing, and record dropping.
Addresses pick-up arm friction and operational noise issues.
Instructions for correctly mounting pick-up cartridges.
Details how to check and adjust tracking.
Illustrates motor wiring for different voltages and speeds.
Guide for replacing the motor pulley to operate at 60 Hz.
Step-by-step guide for pick-up arm replacement.
Instructions for exchanging cueing lever and lift rod.
Procedure for replacing the control cam.
Lists points needing lubrication and types of oils/greases.
Instructions for installing the preamplifier with playback units.
Details on connecting the preamplifier to mains power and voltage settings.
Lists technical specifications of the preamplifier.
Catalog of available spare parts for the preamplifier.
General| Speeds | 33 1/3, 45, 78 RPM |
|---|---|
| Output | RCA |
| Tonearm Length | 9 inches |
| Platter | Aluminum |
| Power Supply | 50/60 Hz |
To Next Page