29
ENENEN
Mode
OK
T Set
ON
Mode
OK
T Set
ON
From the current mode
you can change the
t temperature
setting by pressing the
button. The
new setting is saved
instantly.
T
Se
or
Press the or
button to vary
the value.T Set
Every time the or button is pressed, the temperature will change
by 0.1 degree. Keep either button pressed to activate the rapid scroll.
Or:
4.3 - CHANGING the T TEMPERATURE SETTINGSet
IMPORTANT!
Note: anti-freeze temperature has been excluded (refer to the
PROGRAMMABLE FUNCTIONS chapter), the user cannot
change the anti-freeze temperature setting.
Thermostat off
- Air conditioning off
- Boiler functioning on room temperature less than 4,0 °C
3°
from winter mode “Antifreeze” temperature 4,0 °C (Adjust/exclude)
1°
2°
Press the
button once or
repeatedly until the
desired operation
mode is displayed.
Mode
5 seconds after the last button is released, the thermostat
resumes in the previous mode.
The thermostat accepts a temperature range from +5 °C
to 37.0 °C with temperature values that satisfy the following
conditions:
T Set
the "Comfort" temperature setting greater than or
equal to the winter "Reduction" temperature.
the "Comfort" temperature setting less than or
equal to the summer "Reduction" temperature.
Winter:
Summer:
Winter mode
Comfort temperature 20.0 °C
():heating
Summer mode ():cooling
"Comfort" temperature 25.0 °C
Winter night-time reduction:
"Reduction" temperature 17.5 °C
Summer night-time reduction:
"Reduction" temperature 28.0 °C
Boiler operation with the room temperature lower than 20.0 °C
Boiler operation with the room temperature lower than 17.5 °C
Air-conditioner operation with the room temperature greater than 25.0 °C
Air-conditioner operation with the room temperature greater than 28.0 °C
Note: The maximum and minimum temperature settings can be blocked
(refer to the PROGRAMMABLE FUNCTIONS chapter).
The following are the T set temperature settings:default
Example:
within 5 seconds:
4 - USER INSTRUCTIONS
To Next Page
