Persistent Systems Wave Relay MPU5 Basic Operator Manual

© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
03EN073 Rev. M
PAGE 37 OF 176
PHYSICAL SETUP: SIDE CONNECTORS
4
5
Twist the thumbscrew clockwise to attach
the cable to the device.
Ensure that the cable is firmly attached and
the connector is sitting flush with the case.
Ensure that there are no foreign objects in the
thumbscrew or side connector.
4
Ensure that the cable connector is flush with the
case.
5
What do I do if the cable won’t mate
with the side connector?
?
Ensure that you are trying to connect the cable to
the correct side connector.
1
Ensure that you are aligning the key pin properly
and the cable is not upside down.
2
Ensure that no parts of the thumbscrew and the
side connector are bent or damaged.
3

Persistent Systems Wave Relay MPU5 Specifications

General

Brand	Persistent Systems
Model	Wave Relay MPU5
Category	Radio
Language	English