SETUP
1. Download the Petcube App and register your account.
2. Power up the camera and wait for yellow light to flash.
3. Press the Setup Button on the side speaker
above the USB port until you hear the sound.
4. Follow instructions in the app to finish the setup.
PLACEMENT
It is best to point Bites 2 Lite in the direction where your pets spend most of their time so
their activities are captured with the wide-angle lens.
If placing on a table or a shelf, put Bites 2 Lite at least 3 feet above the floor. A rubber foot
at the bottom provides a firm grip on the surface.
If you want to hang a camera on a drywall, anchor screws are included in the packaging for
easy and secure setup.
To Next Page
Need help?
General
