19. What ports do I need to open for Petcube on my firewall
If you have a firewall on your wi-fi network or you have a block on some ports,
below is the list of ports that need to be open for Petcube:
1. 67.228.165.226:3335/tcp
2. 67.228.165.226:16384-32384/udp
3. cube_ext_ip:7000-7100/udp (optionally, NAT)
4. 52.0.95.32:443/tcp
5. 34.195.161.50:443/tcp
To Next Page
Loading...
