16
Step 1: Pass the belt through the receiver
Step 3: Pass the excess belt through the silicone ring
Step 2: Pass the belt through the tri-glides buckle
2.Wearing precautions
3.How to Assemble the Collar Belt
Prolonged or tight collar wearing may cause skin irritation to your dog,
which must be avoided.
Please make sure not to let your dog wear the collar for more than
12 hours a day.
Try to readjust the collar position on the pet's neck every 1 to 2
hours.
Regularly check the collar's tightness to prevent excessive pressure.
Do not attach a leash to this collar, as it may cause excessive
pressure on the device.
Clean your pet's neck area and the receiver's contact area with a
damp cloth every week.
Check the contact area daily for signs of rash or pain.
Stop using the collar and seek medical attention immediately if you
notice a rash or pain in your dog. If the condition persists for more
than 48 hours, stop using the collar.
①
②
③
To Next Page
Loading...