• Park lights
•
License plate lights
• Hazard/turn signals
• Low beam headlights
• High beam headlights
• First set of fog/driving lights
• Tail lights
• Stop lights
• Reverse lights
• Fog lights (option)
• Driving lights (option)
• Daytime Running Lights (option)
The following lights stay on during the
duration of a full test:
• Clearance lights
• Identification lights
• Side Marker lights
• Beacon/Strobe (option)
• Work/Load lights (option)
• Sign light (option)
Limited ELST
A limited ELST will alternately turn on and
then off the following lights:
• Hazard/turn signals
• Low beam headlights
• High beam headlights
• Park lights
• Daytime running lights (option)
• License plate lights
• Tail lights
• Stop lights
The following lights will stay on during the
duration of a limited test:
• Clearance lights
• Identification lights
• Side marker lights
Test the Exterior Lights
For a full ELST, the parking brake must be
set and the ignition switch must be in the
ON position. For a limited ELST, the
ignition switch must be in the ACC or OFF
position.
A full ELST will test all exterior lights (also
checking the mirror and headlight heaters if
the engine is on). A limited ELST will test
only the legal driving lights.
1. Turn the Exterior Lighting Switch
(ELS) to the momentary ELST
position and release the switch, or
The ELST icon will illuminate.
2. Press the ELST button on the key
fob.
A full ELST will continue until the parking
brake is released or the ignition switch is
turned to OFF
. Both the full and limited
ELST will stop if either the dash or key fob
ELST buttons are pressed, or the fifteen
minute test duration has elapsed.
Steering Column Controls
1. Mulitfunction turn signal/wiper/
washer
2.
City Horn
CONTROLS - Steering Column Controls
78 Y53-6096-1C1 (09/20)
3
https://www.besttruckmanuals.com/
To Next Page
Loading...
