Application Type of Clamp lb-in. N•m
Heater Hoses Constant Tension not required not required
Air Intake Pipes Hi Torque HTM-L 100-125 11.3-14.2
Plastic Air Intake Pipes Constant Torque CT-L 88 10.0
Charge Air Intake Hoses Flex Seal 70-100 7.9-11.3
B9296 50-60 6-7
Fuel, Oil and Water Heat
Exchangers (for hoses less
than 9/16 in. diameter).
Miniature 3600L 10-15 1.1-1.7
Wheel Cap Nut Torque
Specifications
At the first scheduled lube interval, have all
wheel cap nuts torqued to their specified
value. After that, check wheel cap nuts at
least once a week.
Contact an authorized dealer for
information on the proper installation
procedure for the wheels on your truck.
This is a job you may not be able to do
yourself. Y
ou need the right torquing
equipment to do it.
Wheel and Nut Configuration Stud Size
Torque for Inner and Outer Cap Nuts and Rim Clamp Nuts
lb-ft N•m
Steel or Aluminum Disc-Type
Wheel; Double Cap Nut
Mounting; Standard 7/8 Radius
Ball Seat
3/4-16 450-500 610-680
1-1/8-16 450-500 610-680
MAINTENANCE - Specification Reference Charts
Y53-6113-1A1 (11/20) 275
5
To Next Page
Loading...
